2 x 1mm spacers
2 x 0.5mm spacers
1 x wave washer
2 x 30x42mm seals
2 x BB30 frame circlips

Complete PressFit BB30 with Enduro ABEC 5 Bearings.

NB this is not for conventional BB30 shells

Complete PressFit BB30 with Enduro Zero Ceramic Hybrid Bearings.

NB this is not for conventional BB30 shells

Complete PressFit BB30 with Enduro Ceramic Hybrid  Grade 5 Bearings.

NB this is not for conventional BB30 shells

Complete PressFit BB30 with Std Enduro Bearings.

NB this is not for conventional BB30 shells

Complete PressFit BB30 with Enduro XD-15 Bearings

NB this is for PF30 shells NOT for conventional BB30 shells

circlip used in frames to retan BB30 bearings

All BB30 bottom brackets

All BB30 bottom brackets

All BB30 bottom brackets

All BB30 bottom brackets

All BB30 bottom brackets

All BB30 bottom brackets

The bearings for the XD-15 are made from nitrogen steel milled from the south of France. This steel uses nitrogen instead of carbon as most steels use. The nitrogen allows for a more homogeneous grain structure. This more consistent grain structure makes the races smoother and longer wearing. As nitrogen steel is inherently stainless, it also offers the highest level of corrosion protection. The nitrogen steel we use in the XD-15 bottom bracket is used in jet turbines of Airbus aircraft.

We could have stopped there but decided to go even further with the XD-15 bottom bracket design. We chose to make the bearings angular contact. Traditional bottom brackets use radial bearings. Unfortunately, radial bearings have a hard time dealing with lateral loads that come with using external BB cranks. The newer crank designs can put unwanted side load on the bearings causing increase friction and wear. The XD-15 bottom bracket eliminates the problem and the bottom bracket runs smoothly even with side load. This makes the bottom bracket a lot more robust to variations in installations.

XD-15 bottom brackets come with a one year guarantee against wearing out or defects. That means you can ride them to your hearts content in rain and muck and not have to worry - they are that tough!

Weight 105 grams for the complete BB

XD-15 bottom brackets come with a one year guarantee against wearing out or defects. That means you can ride them to your hearts content in rain and muck and not have to worry - they are that tough!

Weight 105 grams for the complete BB

The bearings for the XD-15 are made from nitrogen steel milled from the south of France. This steel uses nitrogen instead of carbon as most steels use. The nitrogen allows for a more homogeneous grain structure. This more consistent grain structure makes the races smoother and longer wearing. As nitrogen steel is inherently stainless, it also offers the highest level of corrosion protection. The nitrogen steel we use in the XD-15 bottom bracket is used in jet turbines of Airbus aircraft.

We could have stopped there but decided to go even further with the XD-15 bottom bracket design. We chose to make the bearings angular contact. Traditional bottom brackets use radial bearings. Unfortunately, radial bearings have a hard time dealing with lateral loads that come with using external BB cranks. The newer crank designs can put unwanted side load on the bearings causing increase friction and wear. The XD-15 bottom bracket eliminates the problem and the bottom bracket runs smoothly even with side load. This makes the bottom bracket a lot more robust to variations in installations.

XD-15 bottom brackets come with a one year guarantee against wearing out or defects. That means you can ride them to your hearts content in rain and muck and not have to worry - they are that tough!

Weight 99 grams for the complete BB

The bearings for the XD-15 are made from nitrogen steel milled from the south of France. This steel uses nitrogen instead of carbon as most steels use. The nitrogen allows for a more homogeneous grain structure. This more consistent grain structure makes the races smoother and longer wearing. As nitrogen steel is inherently stainless, it also offers the highest level of corrosion protection. The nitrogen steel we use in the XD-15 bottom bracket is used in jet turbines of Airbus aircraft.

We could have stopped there but decided to go even further with the XD-15 bottom bracket design. We chose to make the bearings angular contact. Traditional bottom brackets use radial bearings. Unfortunately, radial bearings have a hard time dealing with lateral loads that come with using external BB cranks. The newer crank designs can put unwanted side load on the bearings causing increase friction and wear. The XD-15 bottom bracket eliminates the problem and the bottom bracket runs smoothly even with side load. This makes the bottom bracket a lot more robust to variations in installations.

XD-15 bottom brackets come with a one year guarantee against wearing out or defects. That means you can ride them to your hearts content in rain and muck and not have to worry - they are that tough!

Weight 99 grams for the complete BB

Allows the use of 24mm cranks in BB30 frames.
These do not include bearings. Select the bearing kit of your choice to go with these for a complete BB

Weight 43 grams

Allows the use of GXP cranks in BB30 frames.
These do not include bearings. Select the bearing kit of your choice to go with these for a complete BB

Allows the use of GXP cranks in BB30 frames.
These do not include bearings. Select the bearing kit of your choice to go with these for a complete BB

Allows the use of 24mm cranks in BB30 frames.
These do not include bearings. Select the bearing kit of your choice to go with these for a complete BB
Weight 45 grams
Black only

Allows the use of SRAM/Truvativ GXP cranks in BBright frames eg Cervelo.
Black

Allows the use of SRAM/Truvativ GXP cranks in BBright frames eg Cervelo.
Red

External cups to run 30mm cranksets by Clavicular and Zipp in std threaded bottom bracket shells.

Outboard bearing upgrade kit for Shimano RaceFace
Enduro bearings and outer seals.
Also suits press fit Shimano/Truvativ BB's eg Trek Madone

2 x 1mm spacers
2 x 0.5mm spacers
1 x wave washer

Outboard bearing upgrade kit for Shimano RaceFace
Enduro bearings and outer seals.
Also suits press fit Shimano/Truvativ BB's eg Trek Madone

ABEC 5 bearings with angled contact races
Outboard bearing upgrade kit for Shimano RaceFace
Enduro bearings and outer seals.
Also suits press fit Shimano BB's eg Trek Madone
Use GXP adaptor kit with these for all GXP BB's

Outboard bearing upgrade kit for Shimano RaceFace
ZERO Ceramic Hybrid bearings and outer seals.
Also suits press fit Shimano/Truvativ BB's eg Trek Madone

Outboard bearing upgrade kit for Shimano RaceFace
Grade 5 Ceramic Hybrid bearings and outer seals.
Also suits press fit Shimano/Truvativ BB's eg Trek Madone

Outboard bearing upgrade kit for FSA with marginally larger crankshaft
Ceramic Hybrid grade 5 bearings and outer seals

Note: There is only ~07 mm difference between the crankshaft sizes of the FSA variant. However because our bearings sit directly on the crank this makes it impossible to correctly fit our standard BB upgrade bearings. it is important to be able to determine which size FSA crankshaft you have before ordering. Please contact your bike shop or us to ensure you get the right kit.

Add this to one of our Outboard bearing BB sets and you can use them for your SRAM/Truvativ GXP type cranksets.

Replacement press in style bottom bracket to suit BB-86 applications
Fitted with Enduro Abec 5 AC bearings.

Replacement press in style bottom bracket to suit BB-86 applications
Fitted with ZERO bearings.

Replacement press in style bottom bracket to suit BB-86 applications
Fitted with CH5 bearings.

Replacement press in style bottom bracket to suit BB-86 applications
Fitted with Enduro Upgrade bearings.

Replacement press in style bottom bracket to suit BB-92 and BB-89.5 applications
Machined Delrin housings. Fitted with our ABEC 5 Upgrade bearing kit
Suits 24mm cranks like Shimano Raceface etc. Requires the Truvativ/SRAM seal/shim kit for GXP cranks.

Replacement press in style bottom bracket to suit BB-92 and BB-89.5 applications
Machined Delrin housings. Fitted with ZERO bearings.
Suits 24mm cranks like Shimano Raceface etc. Requires the Truvativ/SRAM seal/shim kit for GXP cranks.

Replacement press in style bottom bracket to suit BB-92 and BB-89.5 applications
Machined Delrin housings. Fitted with Enduro CH5 ceramic hybrid bearings
Suits 24mm cranks like Shimano Raceface etc. Requires the Truvativ/SRAM seal/shim kit for GXP cranks.

Replacement press in style bottom bracket to suit BB-92 and BB-89.5 applications
Machined Delrin housings. Fitted with our std Upgrade bearing kit
Suits 24mm cranks like Shimano Raceface etc. Requires the Truvativ/SRAM seal/shim kit for GXP cranks.

Includes the lightweight bearing shields and optional seals.

Used on MTB cups