Shock eye bushing tool for mountain bike rear shocks.
With the right drivers you can replace the standard bushings on most model shocks as well as Enduro Needle bearings for 1/2 inch shock eyes.

With a 6mm allen key you can replace shock eye bushings quickly. On many bikes you can change the bushing without removing the shock from the bike.

Includes: 1/2 inch bushing driver for Fox Rockshox newer X-Fusion etc. Other drivers are available see Shock eye bushing hardware and tools

Tool with both standard 1/2 inch driver and 12mm roller driver.

Shock eye bushing tool for mountain bike rear shocks.
With the right drivers you can replace the standard bushings on most model shocks as well as Enduro Needle bearings for 1/2 inch shock eyes.

With a 6mm allen key you can replace shock eye bushings quickly. On many bikes you can change the bushing without removing the shock from the bike.

Includes: 1/2 inch bushing driver for Fox Rockshox newer X-Fusion etc. and 12mm bushing driver for Manitou etc . Other drivers are available see Shock eye bushing hardware and tools

Tool with both standard 1/2 inch driver and 1/2 inch needle roller driver.

Shock eye bushing tool for mountain bike rear shocks.
With the right drivers you can replace the standard bushings on most model shocks as well as Enduro Needle bearings for 1/2 inch shock eyes.

With a 6mm allen key you can replace shock eye bushings quickly. On many bikes you can change the bushing without removing the shock from the bike.

Includes: 1/2 inch bushing driver and 1/2 inch needle roller driver for Fox Rockshox newer X-Fusion etc. Other drivers are available see Shock eye bushing hardware and tools

Shock eye bushing driver for 1/2 inch shock eye eg Fox Rockshox newer X-Fusion

Shock eye bushing driver for Enduro needle roller to suit 1/2inch type shock eyes eg Fox Rockshox newer X-Fusion

Shock eye bushing driver for 12mm shock eye eg Manitou, older X-Fusion Specialized

Shock eye bushing replacement kit for 1/2 inch shock eye bushings.
Suits: Fox, Rockshox, X-Fusion and other rear shocks that use a 1/2 inch shock eye bushing
With these kits you will need a bench vice or a bit of DIY nous to complete the job.

Includes: 1/2 inch bushing driver, receiver and 2 x 1/2 inch bushings

Shock eye bushing replacement kit for 12mm shock eye bushings.
Suits: Manitou, older X-Fusion and Specialized
With these kits you will need a bench vice or a bit of DIY nous to complete the job.

Includes: 12mm bushing driver, receiver and 2 x 12mm bushings

Needle Roller bearing to replace shock eye bushings in 1/2 inch shock eyes with 30mm from mount reducers.

Fits 30mm frame mounts eg Giant Glory top mount.

Reducers to allow the Fox needle roller to fit a 30mm frame mount eg Giant Glory top mount.
2 pieces.

Reducers to allow the Fox needle roller to fit a 30mm frame mount eg Giant Glory top mount.
2 pieces.

Replaces shock eye bushing in 1/2 inch shock eye Fox Rockshox etc.
Inner shaft is 22mm wide so additional spacing may be required to suit frame mount.

Replaces shock eye bushing in 1/2 inch shock eye Fox Rockshox etc.
Inner shaft is 15.75mm wide. Suits Specialized Stumpjumper etc

Replaces shock eye bushing in 1/2 inch shock eye Fox Rockshox etc.
Inner shaft is 21.90mm x M6 bolt
Suits top shock mount on Anthem - all, Trance - all, Reign 2009-

Replaces shock eye bushing in 1/2 inch shock eye Fox Rockshox etc.
Inner shaft is 22.20mm wide.

Replaces shock eye bushing in 1/2 inch shock eye Fox Rockshox etc.
Inner shaft is 23.9mm wide.

Replaces shock eye bushing in 1/2 inch shock eye Fox Rockshox etc.
Inner shaft is 25.4mm wide.

Pack of 10 1/2 inch bushings

Fox, 5th Element coil, Romic etc
X-Fusion 2008-

aka DU Bushings. 12mm for Manitou, Rock Shox 05 on
X-Fusion -2007

aka DU Bush In 1/2 inch for Fox, 5th Element coil, Romic etc
X-Fusion 2008-